-
-
J Korean Dent Assoc. 2023;61(7):470-478. Published online June 30, 2023.
DOI: https://doi.org/10.22974/jkda.2023.61.7.003
- 광경화성 액상수지경화방식 이용한 치과용 3D 프린터 종류와 특성
-
문원준
, Enshi Jiang
, 최유경
, 임범순
, 정신혜
-
서울대학교 치의학대학원 치과생체재료과학교실
-
- Introduction to photopolymerization-based dental 3D printers
-
Wonjoon Moon
, Enshi Jiang
, Yukyung Choi
, Bum-Soon Lim
, Shin Hye Chung
-
Department of Dental Biomaterials Science, School of Dentistry, Seoul National University
-
- Corresponding author: Shin Hye Chung Tel: +82-2-740-8693, Fax: +82-2-740-8694, Email: den533@snu.ac.kr
- Received: November 4, 2022; Revised: November 21, 2022 Accepted: June 8, 2023.
- Abstract
- 3D printing is an additive manufacturing technique with popularity in dental fields for fabricating a wide range of structures and complex geometries. Photosensitive resin-based materials are the most widely used in
dental clinics, from manufacturing orthodontic devices to implant surgical guides. Each device for 3D printing
carries advantages and disadvantages as well as specific requirements for understanding the printing process.
This article contains an introduction of the vat photopolymerization-based dental 3D printing devices to en-hance understanding, thus gaining feasibility of the clinical use.
Keywords :3d; printing; vat polymerization; stereolithography
